Especially for production of small batches, carbonation systems are a major expense factor.

For this application, the ICS 610 is the ideal solution. This carbonation system is built directly into the beverage line.

It automatically adds the correct amount of carbon dioxide to the beverage.

The ICS 610 is designed especially for spritzers, sparkling wines, table waters and mixed beverages.

A most remarkable feature of the device is the “elegant” solution of the carbon dioxide in the beverage.

The ICS 610 is designed for every particular customer specification.

It can be placed directly before the filler (requiring a small buffer tank) or, better; between two tanks, (the target tank must be pres-surized for the CO2 to stay dissolved.) The rated diameter can be selected as well as the pipe connections.

The device works purely pneumatically and doesn’t need any electric energy supply.

The desired carbon dioxide concentration is set directly at the device itself. If product flow drops below a minimum flow rate, the device is automatically deactivated. When the product flow increases, carbonation is activated again.

The ICS 610 is made of high-grade materials which are approved by food and beverage industry standards.

The device is designed for CIP.

Functional description: 
A feed pump (not included) presses the beverage through a built-in Venturi pipe where the desired amount of CO2 is added.

The CO2 bubbles dissolve in the downstream mixing stage. Within operating range, CO2 dosing is largely independent from the product flow rate.   

Downloads: Laboratory Carbonator LCS 710